CAD-Drawing 0.10
Kwalitee Issues
- has_manifest
-
Add a MANIFEST to the distribution. Your buildtool should be able to autogenerate it (eg "make manifest" or "./Build manifest")
- has_meta_yml
-
Add a META.yml to the distribution. Your buildtool should be able to autogenerate it.
- has_buildtool
-
Add a Makefile.PL (for ExtUtils::MakeMaker/Module::Install) or a Build.PL (for Module::Build and its friends), or use a distribution builder such as Dist::Zilla, Dist::Milla, Minilla.
- has_changelog
-
Add a Changelog (best named 'Changes') to the distribution. It should list at least major changes implemented in newer versions.
- has_tests
-
Add tests!
- manifest_matches_dist
-
Run a proper command ("make manifest" or "./Build manifest", maybe with a force option), or use a distribution builder to generate the MANIFEST. Or update MANIFEST manually.
Error: Cannot find MANIFEST in dist.
- prereq_matches_use
-
List all used modules in META.yml requires
Error:
- Compress::Zlib
- DBI
- Inline
- Inline::C
- Math::Geometry::Planar
- Math::Geometry::Planar::Offset
- Math::Vec
- Stream::FileInputStream
- Tk
- Tk::WorldCanvas
- no_pod_errors
-
Remove the POD errors. You can check for POD errors automatically by including Test::Pod to your test suite.
Error: CAD/Drawing/IO/Tk.pm -- Around line 102: '=item' outside of any '=over' Around line 207: You forgot a '=back' before '=head2' CAD/Drawing/Manipulate.pm -- Around line 98: =cut found outside a pod block. Skipping to next block. CAD/Drawing.pm -- Around line 37: '=item' outside of any '=over' Around line 50: You forgot a '=back' before '=head1' Around line 132: '=item' outside of any '=over' Around line 171: You forgot a '=back' before '=head1'
- has_meta_json
-
Add a META.json to the distribution. Your buildtool should be able to autogenerate it.
- has_tests_in_t_dir
-
Add tests or move tests.pl to the t/ directory!
- proper_libs
-
Move your *.pm files in a directory named 'lib'. The directory structure should look like 'lib/Your/Module.pm' for a module named 'Your::Module'. If you need to provide additional files, e.g. for testing, that should not be considered for Kwalitee, then you should look at the 'provides' map in META.yml to limit the files scanned; or use the 'no_index' map to exclude parts of the distribution.
Error: Calc.pm, Drawing.pm, Drawing/Calculate.pm, Drawing/Calculate/Finite.pm, Drawing/Defined.pm, Drawing/IO.pm, Drawing/IO/Circ.pm, Drawing/IO/DWGI.pm, Drawing/IO/Image.pm, Drawing/IO/OpenDWG.pm, Drawing/IO/PgDB.pm, Drawing/IO/PostScript.pm, Drawing/IO/Tk.pm, Drawing/Manipulate.pm
- meta_yml_has_license
-
Define the license if you are using in Build.PL. If you are using MakeMaker (Makefile.PL) you should upgrade to ExtUtils::MakeMaker version 6.31.
- use_warnings
-
Add 'use warnings' (or its equivalents) to all modules, or convince us that your favorite module is well-known enough and people can easily see the modules warn when something bad happens.
Error: CAD::Calc, CAD::Drawing, CAD::Drawing::Calculate, CAD::Drawing::Calculate::Finite, CAD::Drawing::Defined, CAD::Drawing::IO, CAD::Drawing::IO::Circ, CAD::Drawing::IO::Image, CAD::Drawing::IO::OpenDWG, CAD::Drawing::IO::PgDB, CAD::Drawing::IO::PostScript, CAD::Drawing::IO::Tk, CAD::Drawing::Manipulate
- consistent_version
-
Split the distribution, or fix the version numbers to make them consistent (use the highest version number to avoid version downgrade).
Error: 0.00,0.01,0.02,0.05,0.10,0.20,0.60
- has_separate_license_file
-
This is not a critical issue. Currently mainly informative for the CPANTS authors. It might be removed later.
Modules
Name | Abstract | Version | View |
---|---|---|---|
CAD::Calc | generic cad-related geometry calculations | 0.20 | metacpan |
CAD::Drawing | Methods to create, load, and save vector graphics | 0.10 | metacpan |
CAD::Drawing::Calculate | Calculations for CAD::Drawing | 0.10 | metacpan |
CAD::Drawing::Calculate::Finite | 0.05 | metacpan | |
CAD::Drawing::Defined | exported constants for CAD::Drawing::* | 0.60 | metacpan |
CAD::Drawing::IO | I/O methods for the CAD::Drawing module | 0.20 | metacpan |
CAD::Drawing::IO::Circ | load and save for circle data | 0.01 | metacpan |
CAD::Drawing::IO::DWGI | Perl bindings to the OpenDWG toolkit | metacpan | |
CAD::Drawing::IO::Image | Output methods for images | 0.00 | metacpan |
CAD::Drawing::IO::OpenDWG | accessor methods for OpenDWG toolkit wrapper | 0.20 | metacpan |
CAD::Drawing::IO::PgDB | PostgreSQL save / load methods | 0.01 | metacpan |
CAD::Drawing::IO::PostScript | PostScript output methods | 0.01 | metacpan |
CAD::Drawing::IO::Tk | GUI I/O methods for CAD::Drawing | 0.02 | metacpan |
CAD::Drawing::Manipulate | Manipulate CAD::Drawing objects | 0.10 | metacpan |